Tension springs
We manufacture extension (tension) springs to order from a single piece – to drawing, specified dimensions or a supplied sample. Wire diameter 0.25–20 mm, various loop types at any relative angle, with or without initial tension. Building on a tradition of spring manufacturing in Kunvald since 1950, today we produce in Žamberk, Czech Republic.
What are extension springs
Extension springs are helical springs that are loaded in tension – under load they extend and pull back to their original length. They have loops at the ends, through which they are attached to the mechanism. We manufacture them for automotive, kitchen appliances and industrial manufacturing.
Manufacturing parameters
- Wire diameter
- 0.25–20 mm
- Loop types
- German, English, standard, screw-in, no loops
- Loop angle
- any
- Initial tension
- with or without
- Min. quantity
- 1 piece
- Certification
- ISO 9001
What information we need for a quote
For an accurate quotation we only need a few basic dimensions. If you don't know them, send a photo or a sample – we will measure the dimensions ourselves.
- ·Wire diameter d – the thickness of the wire the spring is wound from.
- ·Outer diameter De – the outer diameter of the wound part.
- ·Free length inside loops L0 – the length of the unloaded spring measured from the inside of one loop to the inside of the other.
- ·Number of active coils n – the number of coils of the wound part.
- ·Body length Lk – the length of the winding without loops. Optional.
- ·Pitch t – optional, fill in only if the coils are not closed.
- ·Loop type and their relative angle – select in the form, or state it on the drawing.

Loop types and designs
We manufacture loops in the following designs:
- ✓German loop (full loop),
- ✓English loop,
- ✓standard loop,
- ✓screw-in eye (insert) – screwed into the end of the spring,
- ✓no loops.
The loops can be at any relative angle, for example 0° or 90°. We manufacture extension springs with or without initial tension – state the required initial tension or initial force on the drawing or in your enquiry.
Materials
- ✓Patented spring steel wire (EN 10270-1) – the most common choice for most applications.
- ✓Valve spring wire (EN 10270-2) – for dynamically loaded springs.
- ✓Stainless spring steel wire (EN 10270-3) – for humid, corrosive and heat-stressed environments.
- ✓Copper alloys such as CuSn6 or CuZn35 – where electrical conductivity or a non-magnetic material is required.
Special materials such as Inconel are available to order – we do not normally keep them in stock, so please specify them in your enquiry.
Surface treatment
We arrange surface treatments in cooperation with proven partners, so we can meet practically any requirement – for example zinc plating, blackening or tin plating. Specify the required treatment in your inquiry.
How we manufacture and inspect
We manufacture extension springs on CNC machines. Every batch is checked for dimensions and forces; a test certificate is available on request. A material test certificate 3.1 according to EN 10204 or declaration of compliance 2.1 is available to order. Production runs under an ISO 9001 quality management system, certified since 2002.
How an order works
- Send your inquiry via the form, with a drawing, dimensions or a photograph.
- Within 24 hours on working days we will contact you with a quotation or follow-up questions.
- After order confirmation we manufacture the springs. Standard lead time 2–8 weeks, rush orders by arrangement. In a hurry? We handle rush orders individually.
- We dispatch the finished springs, with a test certificate on request.